Nowadays it is impracticable to sustain all the mess that we appear to gather. There are more or less some stuffs piling around even when you have arranged the things, making it look disorganized and chaotic. Your laptop is lost beneath piles of manuscripts, research articles and reference books. The latest dress that you purchased is nowhere to be found in your wardrobe. Searching for the things that you need has turn into an exploration and saving task. So this is the moment for you to make a closet organizer.
The task is not that difficult, the way it seems. Here are some definite steps that one must follow. If you proceed with the steps then you are very near towards a refined and organized closet. So relax and let’s get started.
Finding the measurement of your preferred wardrobe is the initial work that needs to be done. It refers to each and every dimension that is the length, breadth and altitude. You must understand how much space you have. Reproduce it in the form of a graph by leveling the measurements.
An easy and effortless closet organizer can be made in a component with two rows to hang your outfits, some compartments and some luggage container. For high wardrobe you need to have access from the exit to the rear side of the wardrobe. But for low cloth wardrobe you need to have access of the two faces of the wardrobe. However similar pattern can be employed for the two types of wardrobe.
After the blueprint is obtained, you must procure the stuffs. You must understand that if you are building straight plank you ought to attach 10% for incision. In case if you incise a plank smaller than what you intend to, it is always wise to have some extra planks. If you are confused about the amount of stuff that you require, you can always enquire the reception. They are always there to help you.
Ledge holders are a must to suspend the ledge on the partition. A wardrobe must have a space of 84” from the base and an 8 foot upper limit from the top. This provides lots of room to keep stuffs on the upper ledge. You must always use plasterboard to fix these ledges, if you don’t want the upper compartment to haul down. Starting from the initial group of support, place another ledge for an additional compartment. 8 to 12 inches below from the uppermost compartment is possibly an excellent choice.
A middle compartment can be constructed in between the last ledge and the base. The surface boards are incised with suitable measurements. The length must be 72” to 76”. You should always confirm the length before cutting. Make sure that the boards that you have cut are of the right size and shape. If the size exceeds your requirement, cut off the unwanted area. But make sure that you measure it carefully. For the middle compartment you will need four planks which are of 1 foot each. Fix the faces of the middle compartment using some 2 ½”wood screws instead of using nails. Nails are likely to come off in course of time. So, wood screws are more suitable for clasping the ledges. You can always put the middle compartment in any area of your choice. And since this structure can be placed on its own you need not attach it anywhere.
Equipments will be needed to suspend the joggle. 6 braces are required to suspend the joggle. The braces are arranged 2 to 3 inches beneath the lower compartment for the higher joggle. The lower joggles are placed 38” over the base. Now you can put the joggle pin in the braces.
So this is everything you need to know. You can now construct your own closet organizer. And the moment you complete it, your wardrobe will be spotless and very organized.